Alessio Lorandi
March 10, 2022
Nascar Heat , Nascar Heat 5 Setups , Setups
3 minutes read
Have you been looking around for the latest and best setups in Nascar Heat 5 but struggled to find any good one?
We all know how essential it is to have a great NASCAR Cup setup in NH5, especially in such a tricky circuit as Daytona.
If you’re looking to crack into the high 44s then you’ll want to minimize the loss of speed in the corners by being as smooth as possible on the steering.
Scrubbing less speed will make you way faster than turning in aggressively and being “dirty” on the steering wheel.
Also, since you take the whole track flat out, make sure that you look for a good draft which is surely going to improve your lap time.
You’ll want to run a negative 4.9 camber setting in the front right, and a positive camber of 5.8 degrees in the front left while the wheel lock can be set at 7 degrees.
You’ll also want a pretty stiff front swaybar around 1.675 since it will help you rotate the car while at the same time not unsettling the rear too much while turning in.
It’s really key to not have too much oversteer in the car though, otherwise you’ll probably lose confidence and lots of time too.
Table of Contents
- Nascar Heat 5 Daytona Cup – video onboard
- Nascar Heat 5 Daytona Cup Setup FAQ
- What is the Ideal Camber Setting for Daytona in NASCAR Heat 5?
- How Should the Wheel Lock be Set for Daytona in NASCAR Heat 5?
- What is the Recommended Front Swaybar Setting for Daytona in NASCAR Heat 5?
- Why is it Important to Avoid Oversteer in NASCAR Heat 5 at Daytona?
- How Can Drafting Improve Lap Times in NASCAR Heat 5 at Daytona?
- Looking to get faster in ACC? Try now our GT3 Setups!
Nascar Heat 5 Daytona Cup – video onboard
Here’s a brief video onboard around Daytona from “The Setup Man” which will help you improve your driving and ultimately your lap times.
If you’re looking for a proven setup that was able to get into the high 44s you just have to go through the video where you can discover the setup he has run.
Nascar Heat 5 Daytona Cup Setup FAQ
What is the Ideal Camber Setting for Daytona in NASCAR Heat 5?
For Daytona in NASCAR Heat 5, the recommended camber settings are:
- Front Right: Negative 4.9 degrees
- Front Left: Positive 5.8 degrees
How Should the Wheel Lock be Set for Daytona in NASCAR Heat 5?
The wheel lock should be set at 7 degrees for Daytona in NASCAR Heat 5. This setting helps in achieving better control and stability on the track.
What is the Recommended Front Swaybar Setting for Daytona in NASCAR Heat 5?
A front swaybar setting of around 1.675 is recommended for Daytona in NASCAR Heat 5. This setting assists in rotating the car effectively while maintaining rear stability during turns.
Why is it Important to Avoid Oversteer in NASCAR Heat 5 at Daytona?
Avoiding oversteer is crucial at Daytona in NASCAR Heat 5 because it can lead to a loss of confidence and time. Oversteer makes the car difficult to control, especially at high speeds, which is critical on a track like Daytona.
How Can Drafting Improve Lap Times in NASCAR Heat 5 at Daytona?
Drafting is a key strategy at Daytona in NASCAR Heat 5. Since the track is taken flat out, finding a good draft can significantly improve lap times by reducing air resistance and increasing speed.
Looking to get faster in ACC? Try now our GT3 Setups!
ACCMercedes GT3 EVO Laguna Seca
ACCLamborghini GT3 EVO2 Bathurst
ACCFerrari 296 GT3 Spa Setup
ACCMercedes GT3 EVO Barcelona
What’s your Reaction?
wow
mind blowing
good
on fire
boring
sick of it
About the autor
Alessio Lorandi
Alessio has been involved at the highest levels in racing since the age of 5 (2003). He won a CIK-FIA World Championship in 2013 and then raced in F3, F2, and finally GT3s before now dedicating himself to SOLOX. He’s now on a mission to help thousands of sim racers around the world achieve their fullest potential through his ACC setups.
Copyright 2023 SOLOX© All rights Reserved by SOLOX LTD. Check our Privacy Policy.
";bct.innerHTML = bct.innerHTML+bctxt;